3 * Copyright (c) 2009, 2010, 2011, 2012, ETH Zurich.
4 * Copyright (c) 2014, HP Labs.
7 * This file is distributed under the terms in the attached LICENSE file.
8 * If you do not find this file, copies can be found by writing to:
9 * ETH Zurich D-INFK, CAB F.78, Universitaetstrasse 6, CH-8092 Zurich,
10 * Attn: Systems Group.
13 // Kernel/syscall errors
14 errors kernel SYS_ERR_ {
15 default success OK "Success",
17 failure NOT_IMPLEMENTED "Kernel functionality NYI",
19 // generic errors during system call handling
20 failure ILLEGAL_SYSCALL "Illegal system call number",
21 failure INVARGS_SYSCALL "Invalid system call arguments",
22 failure CALLER_ENABLED "Invalid system call while enabled",
23 failure CALLER_DISABLED "Invalid system call while disabled",
24 failure ILLEGAL_INVOCATION "Illegal capability invocation",
25 failure INVALID_USER_BUFFER "Invalid user space buffer",
28 failure LMP_NO_TARGET "There is no target dispatcher for this endpoint",
29 failure LMP_TARGET_DISABLED "Target of LMP is disabled",
30 failure LMP_BUF_OVERFLOW "The endpoint buffer is full",
31 failure LMP_EP_STATE_INVALID "Target has corrupt/invalid state in its endpoint structure",
32 failure LMP_CAPTRANSFER_SRC_LOOKUP "Error looking up source for cap transfer",
33 failure LMP_CAPTRANSFER_DST_CNODE_LOOKUP "Error looking up destination CNode for cap transfer",
34 failure LMP_CAPTRANSFER_DST_CNODE_INVALID "Destination CNode cap not of type CNode for cap transfer",
35 failure LMP_CAPTRANSFER_DST_SLOT_OCCUPIED "Destination slot is occupied for cap transfer",
36 failure LRPC_SLOT_INVALID "Invalid slot specified for LRPC",
37 failure LRPC_NOT_L1 "L1 CNode lookup failed for LRPC",
38 failure LRPC_NOT_L2 "L2 CNode lookup failed for LRPC",
39 failure LRPC_NOT_ENDPOINT "Slot specified for LRPC does not contain an endpoint cap",
40 failure INVALID_EPLEN "Endpoint buffer has invalid length",
42 // XXX: this should go away -AB
43 failure IDC_MSG_BOUNDS "Attempted to retrieve a word beyond the size of an LMP message structure",
45 // Generic CSpace lookup errors
46 failure CNODE_NOT_FOUND "Encountered null capability when resolving slot",
47 failure CNODE_TYPE "Encountered non-CNode capability when resolving slot",
48 failure CNODE_RIGHTS "Insufficient rights on CNode",
49 failure DEPTH_EXCEEDED "Exceeded depth limit of CSpace",
50 failure GUARD_MISMATCH "Guard does not match",
51 failure CAP_NOT_FOUND "Capability not found (empty slot encountered)",
52 failure IDENTIFY_LOOKUP "Error while looking up cap to identify",
53 failure L1_CNODE_INDEX "Index into L1 CNode too high",
54 failure CAP_LOOKUP_DEPTH "Invalid capability lookup depth",
55 failure RESIZE_NOT_L1 "Trying to resize non-L1 CNode",
57 // Generic capability manipulation errors
58 failure SLOT_IN_USE "Destination capability slots occupied",
59 failure SLOT_LOOKUP_FAIL "Failure during slot lookup",
60 failure CNODE_NOT_ROOT "Found non-root CNode during root CNode lookup",
61 failure GUARD_SIZE_OVERFLOW "Specified guard size exceeds CSpace depth",
62 failure INVALID_SOURCE_TYPE "Invalid source capability type",
63 failure ILLEGAL_DEST_TYPE "Illegal destination capability type",
64 failure SOURCE_CAP_LOOKUP "Error looking up source capability",
65 failure SOURCE_ROOTCN_LOOKUP "Error looking up source root CNode",
66 failure DEST_CNODE_LOOKUP "Error looking up destination CNode",
67 failure DEST_ROOTCN_LOOKUP "Error looking up destination root CNode",
68 failure DEST_CNODE_INVALID "Destination CNode cap is not of type CNode",
69 failure ROOT_CAP_LOOKUP "Error looking up root capability",
70 failure DEST_TYPE_INVALID "Destination capability is of invalid type",
71 failure INVALID_RETYPE "Invalid source/destination type pair for retyping",
72 failure RETYPE_MAPPING_EXPLICIT "Invalid explicit retype to mapping type",
73 failure RETYPE_INVALID_COUNT "Invalid number of new objects requested",
74 failure REVOKE_FIRST "Capability already has descendants or siblings",
75 failure INVALID_SIZE_BITS "Invalid size for new objects",
76 failure INVALID_SIZE "Invalid size for new objects",
77 failure SLOTS_INVALID "Destination capability slots exceed capacity of CNode",
78 failure SLOTS_IN_USE "One or more destination capability slots occupied",
79 failure RETYPE_CREATE "Error while creating new capabilities in retype",
80 failure RETYPE_INVALID_OFFSET "Offset into source capability invalid for retype",
81 failure RETYPE_INVALID_OBJSIZE "Objsize invalid for retype",
82 failure NO_LOCAL_COPIES "No copies of specified capability in local MDB",
83 failure RETRY_THROUGH_MONITOR "There is a remote copy of the capability, monitor must be involved to perform a cross core agreement protocol",
84 failure TYPE_NOT_CREATABLE "Specified capability type is not creatable at runtime. Consider retyping it from another capability.",
85 failure DEST_CAP_RIGHTS "The destinatin cap rights are not sufficient",
87 // errors on the monitor-kernel interface
88 failure DELETE_LAST_OWNED "Tried to delete the last copy of a locally owned capability that may have remote copies",
89 failure DELETE_REMOTE_LOCAL "Tried to delete foreign copies from local copy",
90 failure CAP_LOCKED "The cap has already been locked",
91 success RAM_CAP_CREATED "A new RAM cap has been created",
93 // errors specific to page mapping
94 failure VNODE_SLOT_INVALID "Destination slot exceeds size of page table",
95 failure WRONG_MAPPING "Wrong source/destination mapping type",
96 failure FRAME_OFFSET_INVALID "Specified offset exceeds size of frame",
97 failure VNODE_SLOT_RESERVED "Destination slot is reserved",
98 failure VNODE_SLOT_INUSE "Destination slot in use: unmap first",
99 failure VNODE_TYPE "Encountered non-VNode capability when manipulating page tables",
100 failure VNODE_LOOKUP_NEXT "Could not find next level page table",
101 failure VNODE_NOT_INSTALLED "VNode not in rooted page table tree",
102 failure VM_ALREADY_MAPPED "This cap copy is already mapped",
103 failure VM_MAP_SIZE "Mapping size too large",
104 failure VM_MAP_OFFSET "Mapping offset too large",
105 failure VM_MAP_RIGHTS "Requested mapping rights too high",
106 failure VM_RETRY_SINGLE "Mapping overlaps multiple leaf page tables, retry",
107 failure VM_FRAME_UNALIGNED "Frame(+offset) for superpage mapping not aligned",
108 failure VM_FRAME_TOO_SMALL "Frame too small for superpage mapping",
110 // errors related to IRQ table
111 failure IRQ_LOOKUP "Specified capability was not found while inserting in IRQ table",
112 failure IRQ_NOT_ENDPOINT "Specified capability is not an endpoint cap",
113 failure IRQ_NO_LISTENER "No listener on specified endpoint cap", // ??
114 failure IRQ_INVALID "Invalid interrupt number",
115 failure IRQ_NO_FREE_VECTOR "Unable to allocate vector",
116 failure IRQ_LOOKUP_DEST "Specified capability was not found while connecting IRQ",
117 failure IRQ_LOOKUP_EP "Specified endpoint capability was not found while connecting IRQ",
118 failure IRQ_NOT_IRQ_TYPE "Specified capability is not an IRQ cap",
119 failure IRQ_WRONG_CONTROLLER "Specified IRQ capability does not target local controller",
120 failure IRQ_NO_ARG "No int_model argument passed",
123 failure IO_PORT_INVALID "IO port out of range",
125 // Dispatcher setup and spawn core invocations
126 failure DISP_CSPACE_ROOT "Error setting CSpace root on dispatcher",
127 failure DISP_CSPACE_INVALID "Invalid capability type given for CSpace root on dispatcher",
128 failure DISP_VSPACE_ROOT "Error setting VSpace root on dispatcher",
129 failure DISP_VSPACE_INVALID "Invalid capability type given for VSpace root on dispatcher",
130 failure DISP_FRAME "Error setting dispatcher frame",
131 failure DISP_FRAME_INVALID "Invalid capability type given for dispatcher frame",
132 failure DISP_FRAME_SIZE "Dispatcher frame too small",
133 failure DISP_NOT_RUNNABLE "Cannot run dispatcher; it is not completely setup",
134 failure DISP_CAP_LOOKUP "Error looking up dispatcher cap",
135 failure DISP_CAP_INVALID "Invalid type capability given for dispatcher cap",
136 failure KERNEL_MEM_LOOKUP "Error looking up capability for kernel memory",
137 failure KERNEL_MEM_INVALID "Invalid capability type passed for kernel memory",
138 failure CORE_NOT_FOUND "Unable to boot core: core ID does not exist",
139 failure ARCHITECTURE_NOT_SUPPORTED "Unable to boot core: specified architecture is not supported by kernel",
140 failure INVALID_YIELD_TARGET "Target capability for directed yield is invalid",
141 failure DISP_OCAP_LOOKUP "Error looking up other dispatcher cap",
142 failure DISP_OCAP_TYPE "Other dispatcher cap is not dispatcher",
144 // VMKit specific errors
145 failure VMKIT_UNAVAIL "Virtualization extensions are unavailable",
146 failure VMKIT_VMCB "Error setting VMCB for dispatcher",
147 failure VMKIT_VMCB_INVALID "Invalid frame capability passed for VMCB",
148 failure VMKIT_CTRL "Error setting control area for dispatcher",
149 failure VMKIT_CTRL_INVALID "Invalid frame capability passed for control structure",
150 failure VMKIT_ENDPOINT "Error setting monitor endpoint for dispatcher",
151 failure VMKIT_ENDPOINT_INVALID "Invalid monitor endpoint capability passed",
152 failure VMKIT_VMX_VMFAIL_INVALID "The VMCS pointer is invalid",
153 failure VMKIT_VMX_VMFAIL_VALID "VMX instruction failed (VM-instruction error field = ErrorNumber)",
155 // Serial port errors
156 failure SERIAL_PORT_INVALID "Invalid serial port",
157 failure SERIAL_PORT_UNAVAILABLE "Serial port unavailable",
159 // Performance monitoring errors
160 failure PERFMON_NOT_AVAILABLE "Performance monitoring feature unavailable",
162 // Time synchronization errors
163 failure SYNC_MISS "Missed synchronization phase",
166 failure ID_SPACE_EXHAUSTED "ID space exhausted",
169 failure DOMAIN_SPACE_EXHAUSTED "Domain space exhausted",
172 // XXX: should not be in kernel
173 failure I2C_UNINITIALIZED "Trying to use uninitialized i2c controller",
174 failure I2C_ZERO_LENGTH_MSG "Zero byte transfers not allowed",
175 failure I2C_WAIT_FOR_BUS "Wait for bus free timed out",
176 failure I2C_FAILURE "I2C subsystem failure",
178 // KCB and related errors
179 failure KCB_NOT_FOUND "Did not find the given kcb.",
182 // errors generated by libmdb
183 errors libcaps CAPS_ERR_ {
185 failure INVALID_ARGS "Invalid arguments",
188 failure MDB_ALREADY_INITIALIZED "MDB not emtpy during restore",
189 failure MDB_INVALID_STATE "MDB not in valid state after restore",
190 failure MDB_INVARIANT_VIOLATION "MDB invariant violated",
192 // mdb operation errors
193 failure MDB_DUPLICATE_ENTRY "Inserted entry already present",
194 failure MDB_ENTRY_NOTFOUND "Removed entry not found",
197 failure CAP_NOT_FOUND "Did not find a matching capability",
200 // errors generated by libbarrelfish code
201 errors libbarrelfish LIB_ERR_ {
203 failure WHILE_DELETING "Error while deleting capability",
204 failure WHILE_FREEING_SLOT "Error while freeing capability slot",
205 failure MALLOC_FAIL "Malloc returned NULL",
206 failure SLAB_ALLOC_FAIL "slab_alloc() returned NULL",
207 failure SLAB_REFILL "Refilling slab allocator failed",
208 failure NOT_IMPLEMENTED "functionality not implemented yet",
209 failure SHOULD_NOT_GET_HERE "Should not get here",
210 failure NOT_CNODE "Function invoked on a capref, that does not represent a CNode",
213 failure CNODE_TYPE "Type requested for cnode creation is not valid cnode type",
214 failure CNODE_SLOTS "#slots requested for cnode creation is invalid",
215 failure CROOT_NULL "Destination root cnode null in cnode_create_foreign_l2",
217 // nested errors in specific functions
218 failure FRAME_ALLOC "Failure in frame_alloc()",
219 failure FRAME_CREATE "Failure in frame_create()",
220 failure FRAME_CREATE_MS_CONSTRAINTS "frame_create() failed due to constraints to mem_serv in ram_alloc",
221 failure VNODE_CREATE "Failure in vnode_create()",
222 failure CNODE_CREATE "Failure in cnode_create()",
223 failure CNODE_CREATE_FROM_MEM "Failure in cnode_create_from_mem()",
224 failure CNODE_CREATE_FOREIGN_L2 "Failure in cnode_create_foreign_l2()",
225 failure RAM_ALLOC "Failure in ram_alloc()",
226 failure RAM_ALLOC_WRONG_SIZE "Wrong size of memory requested in ram alloc",
227 failure RAM_ALLOC_MS_CONSTRAINTS "Ram alloc failed due to constraints to mem_serv",
228 failure RAM_ALLOC_FIXED_EXHAUSTED "No more RAM available in early allocator",
229 failure CAP_MINT "Failure in cap_mint()",
230 failure CAP_COPY "Failure in cap_copy()",
231 failure CAP_RETYPE "Failure in cap_retype()",
232 failure DEVFRAME_TYPE "Failure in devframe_type()",
233 failure CAP_DELETE "Failure in cap_delete()",
234 failure CAP_DESTROY "Failure in cap_destroy()",
235 failure CAP_INVOKE "Failure in cap_invoke()",
236 failure CAP_IDENTIFY "Failure in cap_identify",
237 failure CAP_NOT_MAPPABLE "Failure in cap_identify: cap not mappable",
238 failure ENDPOINT_CREATE "Failure in endpoint_create()",
239 failure FRAME_IDENTIFY "Failure in frame_identify",
240 failure VNODE_MAP "Failure in vnode_map()",
241 failure VNODE_UNMAP "Failure in vnode_unmap()",
242 failure IDC_ENDPOINT_ALLOC "Failure in idc_endpoint_alloc()",
244 failure SLOT_ALLOC_INIT "Failure in slot_alloc_init()",
245 failure SLOT_ALLOC_NO_SPACE "Slot allocator is out of space",
246 failure SLOT_ALLOC_WRONG_CNODE "The slot to free does not belong in this cnode",
247 failure SINGLE_SLOT_ALLOC_INIT_RAW "Failure in single_slot_alloc_init_raw()",
248 failure SINGLE_SLOT_ALLOC_INIT "Failure in single_slot_alloc_init()",
249 failure MULTI_SLOT_ALLOC_INIT "Failure in multi_slot_alloc_init()",
250 failure MULTI_SLOT_ALLOC_INIT_RAW "Failure in multi_slot_alloc_init_raw()",
251 failure SINGLE_SLOT_ALLOC "Failure in single_slot_alloc()",
252 failure RANGE_ALLOC_NOT_HEAD "Function called on non-head range allocator",
253 failure SLOT_ALLOC "Failure in slot_alloc()",
254 failure SLOT_FREE "Failure in slot_free()",
255 failure SLOT_UNALLOCATED "slot_free() was called on an unallocated slot",
256 failure ROOTSA_RESIZE "Failure while resizing root slot allocator",
259 failure VSPACE_CURRENT_INIT "Failure in vspace_current_init()",
260 failure VSPACE_INIT "Failure in vspace_init()",
261 failure VSPACE_LAYOUT_INIT "Failure in vspace_layout_init()",
262 failure VSPACE_DESTROY "Failure in vspace_destroy()",
263 failure VSPACE_REGION_OVERLAP "Overlap with existing region in vspace_add_region()",
264 failure VSPACE_ADD_REGION "Failure in vspace_add_region()",
265 failure VSPACE_REMOVE_REGION "Failure in vspace_remove_region()",
266 failure VSPACE_PAGEFAULT_HANDER "Failure in vspace_pagefault_handler()",
267 failure VSPACE_VREGION_NOT_FOUND "The vregion to remove not found in the vspace list",
268 failure VSPACE_PAGEFAULT_ADDR_NOT_FOUND "The faulting address not found in the page fault handler",
270 failure VSPACE_PINNED_INIT "Failure in vspace_pinned_init()",
271 failure VSPACE_PINNED_ALLOC "Failure in vspace_pinned_alloc()",
272 failure VSPACE_PINNED_INVALID_TYPE "Wrong type of slab requested",
274 failure VREGION_MAP "Failure in vregion_map()",
275 failure VREGION_MAP_FIXED "Failure in vregion_map_fixed()",
276 failure VREGION_NOT_FOUND "vregion not found in the vspace list",
277 failure VREGION_DESTROY "Failure in vregion_destroy()",
278 failure VREGION_PAGEFAULT_HANDLER "Failure in vregion_pagefault_handler()",
279 failure VREGION_BAD_ALIGNMENT "Unaligned address passed to vregion_map_fixed",
281 failure MEMOBJ_CREATE_ANON "Failure in memobj_create_anon()",
282 failure MEMOBJ_CREATE_ONE_FRAME "Failure in memobj_create_one_frame()",
283 failure MEMOBJ_CREATE_ONE_FRAME_ONE_MAP "Failure in memobj_create_one_frame_one_map()",
284 failure MEMOBJ_CREATE_PINNED "Failure in memobj_create_pinned()",
285 failure MEMOBJ_CREATE_VFS "Failure in memobj_create_vfs()",
286 failure MEMOBJ_MAP_REGION "Failure in memobj_map_region()",
287 failure MEMOBJ_UNMAP_REGION "Failure in memobj_unmap_region()",
288 failure MEMOBJ_PIN_REGION "Failure in memobj_pin_region()",
289 failure MEMOBJ_UNPIN_REGION "Failure in memobj_unpin_region()",
290 failure MEMOBJ_FILL "Failure in memobj_fill()",
291 failure MEMOBJ_PAGEFAULT_HANDLER "Failure in memobj_pagefault_handler()",
292 failure MEMOBJ_PAGER_FREE "Failure in memobj_pager_free()",
293 failure MEMOBJ_WRONG_OFFSET "Wrong offset passed",
294 failure MEMOBJ_FRAME_ALLOC "Failure the frame alloc function pointer",
295 failure MEMOBJ_VREGION_ALREADY_MAPPED "Pinned memobj only supports one vregion",
296 failure MEMOBJ_UNFILL_TOO_HIGH_OFFSET "The offset given to unfill is too large",
297 failure MEMOBJ_PROTECT "Failure in memobj protect call",
298 failure MEMOBJ_DUPLICATE_FILL "The offset given to fill is already backed",
300 failure PMAP_INIT "Failure in pmap_init()",
301 failure PMAP_CURRENT_INIT "Failure in pmap_current_init()",
302 failure PMAP_DETERMINE_ADDR "Failure in pmap_determine_addr()",
303 failure PMAP_DO_MAP "Failure in pmap_do_map()",
304 failure PMAP_MAP "Failure in pmap_map()",
305 failure PMAP_DO_SINGLE_MAP "Failure in pmap_do_single_map()",
306 failure PMAP_UNMAP "Failure in pmap_unmap()",
307 failure PMAP_DO_SINGLE_UNMAP "Failure in pmap_do_single_unmap()",
308 failure PMAP_MODIFY_FLAGS "Failure in pmap_modify_flags()",
309 failure PMAP_GET_PTABLE "Failure in get_mapping()",
310 failure PMAP_ALLOC_VNODE "Failure in alloc_vnode()",
311 failure PMAP_CLONE_VNODE "Failure in clone_vnode()",
312 failure PMAP_ADDR_NOT_FREE "The requested address range is not free",
313 failure PMAP_FIND_VNODE "vnode not found",
314 failure PMAP_EXISTING_MAPPING "Cannot replace existing mapping, unmap first",
315 failure PMAP_FRAME_SIZE "Given Frame to small to fulfil mapping request",
316 failure PMAP_FRAME_IDENTIFY "Frame could not be identified",
317 failure PMAP_NOT_MAPPED "No mapping in given address range",
318 failure PMAP_ALLOC_CNODE "Failure while allocating Mapping CNode",
320 failure OUT_OF_VIRTUAL_ADDR "Out of virtual address",
322 failure SERIALISE_BUFOVERFLOW "Buffer overflow while serialising",
324 failure VSPACE_MAP "Failure in vspace_map() wrapper function",
326 failure VSPACE_MMU_AWARE_INIT "Failure in vspace_mmu_aware_init() function",
327 failure VSPACE_MMU_AWARE_MAP "Failure in vspace_mmu_aware_map() function",
328 failure VSPACE_MMU_AWARE_NO_SPACE "Out of space in vspace_mmu_aware_map() function",
330 // Performance counters
331 failure INVOKE_PERFMON_SETUP "Error in invoke perfmon setup",
332 failure INVOKE_PERFMON_WRITE "Error in invoke perfmon write",
335 failure CORESET_NEW "Failure in coreset_new()",
336 failure CORESET_GET_NEXT_DONE "No more elements left in coreset_get_next()",
338 // IDC (and LMP/UMP channels)
339 failure NO_LMP_MSG "No LMP message available",
340 failure LMP_RECV_BUF_OVERFLOW "LMP message in endpoint is longer than user-provided buffer",
341 failure NO_UMP_MSG "No UMP message available",
342 failure UMP_CHAN_FULL "Cannot send UMP: channel is full",
343 failure LMP_BUFLEN_INVALID "Cannot create LMP endpoint, invalid buffer length",
344 failure NO_ENDPOINT_SPACE "Cannot allocate LMP endpoint, out of space in dispatcher frame",
345 failure UMP_BUFSIZE_INVALID "Size of UMP buffer is invalid (must be multiple of message size)",
346 failure UMP_BUFADDR_INVALID "Address of UMP buffer is invalid (must be cache-aligned)",
347 failure UMP_FRAME_OVERFLOW "Provided frame is too small for requested UMP channel sizes",
348 failure LMP_ENDPOINT_REGISTER "Failure in lmp_endpoint_register()",
349 failure CHAN_REGISTER_SEND "Failure in *_chan_register_send()",
350 failure CHAN_DEREGISTER_SEND "Failure in *_chan_deregister_send()",
351 failure CHAN_REGISTER_RECV "Failure in *_chan_register_recv()",
352 failure CHAN_DEREGISTER_RECV "Failure in *_chan_deregister_recv()",
353 failure LMP_CHAN_INIT "Failure in lmp_chan_init()",
354 failure UMP_CHAN_INIT "Failure in ump_chan_init()",
355 failure LMP_CHAN_RECV "Failure in lmp_chan_recv()",
356 failure UMP_CHAN_RECV "Failure in ump_chan_recv()",
357 failure LMP_CHAN_SEND "Failure in lmp_chan_send()",
358 failure LMP_CHAN_BIND "Failure in lmp_chan_bind()",
359 failure UMP_CHAN_BIND "Failure in ump_chan_bind()",
360 failure LMP_CHAN_ACCEPT "Failure in lmp_chan_accept()",
361 failure UMP_CHAN_ACCEPT "Failure in ump_chan_accept()",
362 failure LMP_ALLOC_RECV_SLOT "Failure in lmp_chan_alloc_recv_slot()",
363 failure LMP_NOT_CONNECTED "Channel is disconnected",
364 failure MSGBUF_OVERFLOW "Attempted to demarshall beyond bounds of message buffer",
365 failure MSGBUF_CANNOT_GROW "Failed to grow message buffer while marshalling",
366 failure RCK_NOTIFY "Failure in rck_notify()",
367 failure IPI_NOTIFY "Failure in ipi_notify()",
369 // IDC binding/export and Monitor client interface
370 failure MONITOR_CLIENT_BIND "Error in monitor_client_lmp_bind()",
371 failure MONITOR_CLIENT_ACCEPT "Error in monitor_client_lmp_accept()",
372 failure NAMESERVICE_NOT_BOUND "Name service client is not bound",
373 failure NAMESERVICE_UNKNOWN_NAME "Lookup failed: unknown name",
374 failure NAMESERVICE_INVALID_NAME "Invalid record retrieved (no iref attribute)",
375 failure BIND_LMP_REQ "Failure sending bind_lmp_request to monitor",
376 failure BIND_UMP_REQ "Failure sending bind_ump_request to monitor",
377 failure BIND_LMP_REPLY "Failure sending bind_lmp_reply to monitor",
378 failure BIND_UMP_REPLY "Failure sending bind_ump_reply to monitor",
379 failure NO_LMP_BIND_HANDLER "LMP connection handler not registered for this service",
380 failure NO_UMP_BIND_HANDLER "UMP connection handler not registered for this service",
381 failure MONITOR_CAP_SEND "Failed sending capability via monitor",
382 failure MONITOR_RPC_BIND "Error in monitor_rpc_init()",
383 failure MONITOR_RPC_NULL "Monitor RPC client is uninitialized",
386 failure BIND_MULTIHOP_REQ "Failed sending bind_multihop_request to monitor",
387 failure NO_MULTIHOP_BIND_HANDLER "MULTIHOP connection handler not registered for this service",
388 failure BIND_MULTIHOP_SAME_CORE "Cannot create a multihop channel to service on the same core",
391 failure BULK_UNKNOWN_ID "Unknown bulk transfer block ID",
394 failure NO_SPANNED_DISP "There is no spanned dispatcher on the given core",
395 failure SEND_RUN_FUNC_REQUEST "Failure in trying to send run_func_request",
396 failure SEND_CAP_REQUEST "Failure in trying to send capability",
397 failure CAP_COPY_FAIL "cap_copy failed",
398 failure CAP_DELETE_FAIL "cap_delete failed",
401 failure RAM_ALLOC_SET "Failure in ram_alloc_set()",
402 failure MORECORE_INIT "Failure in morecore_init()",
403 failure MONITOR_CLIENT_INIT "Failure in monitor_client_init",
404 failure MONITOR_CLIENT_CONNECT "Failure in monitor_client_connect",
405 failure TERMINAL_INIT "Failure in terminal_init()",
406 failure DOMAIN_INIT "Failure in domain_init()",
407 failure GET_MON_BLOCKING_IREF "Error while retrieving monitor's blocking channel service IREF from monitor",
408 failure GET_MEM_IREF "Failure sending memory iref request",
409 failure GET_NAME_IREF "Error while retrieving name service IREF from monitor",
410 failure GET_RAMFS_IREF "Error while retrieving ramfsd service IREF from monitor",
411 failure NAMESERVICE_CLIENT_INIT "Failure initialising nameservice client",
414 failure THREAD_CREATE "A version of thread create failed",
415 failure THREAD_JOIN "Joining more than once not allowed",
416 failure THREAD_JOIN_DETACHED "Tried to join with a detached thread",
417 failure THREAD_DETACHED "Thread is already detached",
419 // Waitset/event code
420 failure CHAN_ALREADY_REGISTERED "Attempt to register for an event on a channel which is already registered",
421 failure CHAN_NOT_REGISTERED "Channel is not registered with a waitset",
422 failure WAITSET_IN_USE "Waitset has pending events or blocked threads",
423 failure WAITSET_CHAN_CANCEL "Error in waitset_chan_cancel()",
424 failure NO_EVENT "Nothing pending in check_for_event()",
425 failure EVENT_DISPATCH "Error in event_dispatch()",
426 failure EVENT_ALREADY_RUN "Error in event_queue_cancel(): event has already been run",
427 failure EVENT_QUEUE_EMPTY "Error in event_queue_trigger(): queue is empty",
429 // LDT management on x86
430 failure SEGBASE_OVER_4G_LIMIT "Segment base address is above 32-bit boundary",
431 failure LDT_FULL "LDT is out of space",
432 failure LDT_SELECTOR_INVALID "Segment selector is invalid for LDT",
434 // Process management client library
435 failure PROC_MGMT_CLIENT_ACCEPT "Error in proc_mgmt_client_lmp_accept()",
438 // errors in Flounder-generated bindings
439 errors flounder FLOUNDER_ERR_ {
440 failure INVALID_STATE "Invalid/corrupt state in binding structure",
441 failure TX_BUSY "Cannot queue message for transmit: queue is full",
442 failure TX_MSG_SIZE "Trying to send a message which is larger than declared",
443 failure RX_EMPTY_MSG "Incoming message invalid: empty payload",
444 failure RX_INVALID_MSGNUM "Incoming message invalid: unknown message code",
445 failure RX_INVALID_LENGTH "Incoming message has invalid length",
446 failure BUF_RECV_MORE "(internal) incomplete buffer received; call again for more",
447 failure BUF_SEND_MORE "(internal) incomplete buffer sent; call again to send more",
448 failure GENERIC_BIND_NO_MORE_DRIVERS "Generic bind() call failed after trying all enabled interconnect drivers",
449 failure CHANGE_WAITSET "Error in change_waitset() call",
450 failure CHANGE_MONITOR_WAITSET "Error changing waitset on underlying monitor binding",
451 failure UMP_ALLOC_NOTIFY "Error while allocating notify cap/state for UMP",
452 failure UMP_STORE_NOTIFY "Error while storing notify cap for UMP",
454 failure BIND "Error in flounder generated bind call",
456 // XXX: errors from old flounder stubs, to be removed
457 failure CREATE_MSG "Flounder marshalling code failed: create_msg() returned NULL", // FIXME
458 failure MARSHALLING "Error while marshalling",
459 failure DEMARSHALLING "Error while demarshalling",
460 failure RPC_MISMATCH "RPC response not matching the call",
464 // errors generated by bcast library
465 errors bcast BCAST_ERR_ {
466 failure SEND "Failure in bcast_send function",
467 failure SEND_SSF "Failure in trying to send ssf msg",
470 // errors generated in the monitor-client protocol
471 errors mon_client MON_CLIENT_ERR_ {
472 failure SPAN_DOMAIN_REQUEST "Error sending span_domain_request msg",
473 failure URPC_BLOCK "Error sending urpc_block msg",
476 // errors generated by the Monitor
477 errors monitor MON_ERR_ {
478 failure IDC_BIND_NOT_SAME_CORE "Cannot perform IDC bind call: IREF is on another core",
479 failure IDC_BIND_LOCAL "Cannot perform IDC bind call: intra-domain binding",
480 failure INVALID_CORE_ID "Core ID is invalid (out of range)",
481 failure INVALID_IREF "Invalid IREF for bind call",
482 failure IREF_ALLOC "Cannot allocate IREF, table full",
483 failure SPAN_STATE_ALLOC "Failed to allocate span state",
484 failure SEND_REMOTE_MSG "Sending message to remote core failed",
485 failure INVALID_MON_ID "Monitor ID in message is invalid",
486 failure NO_MONITOR_FOR_CORE "No monitor loaded on this core ID",
487 failure CAP_IDENTIFY "Error in cap_identify",
488 failure CAP_CREATE "Failure creating new capability",
489 failure CAP_REMOTE "Failure in remote cap operation",
490 failure CAP_FOREIGN "Could not perform operation because cap is foreign",
491 failure CAP_MOVE "Cap could not be moved",
492 failure RCAP_DB_NOT_FOUND "Cannot find cap in remote cap db",
493 failure RCAP_DB_LOCK "Error gaining lock in remote cap db",
494 failure RCAP_DB_UNLOCK "Error unlocking cap in remote cap db",
495 failure RCAP_DB_ADD "Error adding cap to remote cap db",
496 failure SAME_CORE "Cannot perform operation on same core as caller",
497 failure REMOTE_CAP_NEED_REVOKE "Cap has descendants on another core, cannot be retyped",
498 failure REMOTE_CAP_RETRY "Remote Cap operation failed but retry",
499 failure SPAWN_CORE "Failure spawning a new core",
500 failure SPAWN_DOMAIN "Failure in trying to spawn a domain",
501 failure INTERN_NEW_MONITOR "Error in intern_new_monitor()",
502 failure CAP_SEND "Permanent error sending cap for URPC channel",
503 failure CAP_SEND_TRANSIENT "Transient error sending cap for URPC channel",
504 failure ROUTE_SET "Sending route set msg failed",
505 failure SPAN_DOMAIN "span_domain failed",
506 failure MAP_URPC_CHAN "failure while mapping in URPC channel state",
507 failure RAM_ALLOC_ERR "failure in ram_alloc, err failed",
508 failure RAM_ALLOC_RETERR "failure in ram_alloc, reterr failed",
509 failure MULTICAST_PAGE_MAP "Could not map the multicast page in monitor",
510 failure WRONG_CAP_TYPE "Cap of not expected type",
511 failure INTERN_SET "Failure in intern_set",
512 failure ROUTE_RESET "Failure in sending route reset msg",
513 failure MAP_MULTIBOOT "Failure in trying to map multiboot image",
514 failure UNICAST_SET "Failure in unicast_set()",
515 failure MULTICAST_SET "Failure in multicast_set()",
516 failure BCAST_INIT "Failure in bcast_init()",
517 failure BCAST_CONNECT "Failure in bcast_connect()",
518 failure CCAST_INIT "Failure in ccast_init()",
519 failure CCAST_CONNECT "Failure in ccast_connect()",
520 failure UNICAST_CONNECT "Failure in connecting unicast path",
521 failure MULTICAST_CONNECT "Failure in connecting multicast path",
522 failure UNICAST_INIT "Failure in initing unicast path",
523 failure MULTICAST_INIT "Failure in initing multicast path",
524 failure SPAWN_XCORE_MONITOR "Failure in spawn_xcore_monitor()",
525 failure INCOMPLETE_ROUTE "(Portion of) routing table not present",
527 // Resource controller
528 failure RSRC_ALLOC "Out of resource domains",
529 failure RSRC_MEMBER_LIMIT "Reached member limit of resource domain",
530 failure RSRC_ILL_MANIFEST "Illegal manifest",
531 failure RSRC_NOT_FOUND "Resource domain not found on this core",
534 failure CAPOPS_BUSY "Other end not ready for operation",
537 failure INVOKE_IRQ_ALLOCATE "Unable to allocate IRQ vector",
538 failure INVOKE_IRQ_SET "Unable to install IRQ vector",
541 // errors related to the routing library
542 errors routing ROUTE_ERR_ {
543 // These are for the old routing library, remove them when old lib is removed
544 failure NEW_ROUTE "Failure in creating a new route",
545 failure EXPORT "Failure in exporting new route",
546 failure LOOKUP "Failure in looking up new route",
547 failure BIND "Failure in binding with route",
548 failure CORE_NOT_FOUND "Core not found in unicast send",
549 failure SET_EXPECTED "Failure in using the set expected function",
550 failure SEND "Failure in using the send function",
551 failure NO_SLOTS "Convergecast route ran out of slots to hold records",
553 // These are for the new routing library
554 failure WRONG_GROUP_ID "Group id not found",
555 failure CALL_INIT "Call route_init before using this",
556 failure CREATE_GROUP_RPC "Error in using the create_group rpc",
557 failure SET_GROUP_RPC "Error in using the set_group rpc",
558 failure GET_GROUP_RPC "Error in using the get_group rpc",
559 failure ALLOC_NID_RPC "Error in using the alloc_nid rpc",
562 // errors related to spawn code
563 errors spawn SPAWN_ERR_ {
564 failure LOAD "Failure while loading",
565 failure SPAN "Failure while spanning",
566 failure RUN "Failure while making dispatcher runnable",
567 failure VSPACE_MAP "Nested failure in spawn_vspace_map",
568 failure GET_CMDLINE_ARGS "Failure in get_cmdline_args",
569 failure SETUP_ENV "Failure in spawn_setup_env",
570 failure UNKNOWN_TARGET_ARCH "Unknown target architecture type",
571 failure UNSUPPORTED_TARGET_ARCH "Unsupported target architecture type",
573 failure SETUP_CSPACE "Failure in spawn_setup_cspace",
574 failure DETERMINE_CPUTYPE "Failure in spawn_determine_cputype",
575 failure VSPACE_INIT "Failure in spawn_vspace_init",
576 failure SETUP_DISPATCHER "Failure in spawn_setup_dispatcher",
577 failure ELF_MAP "Failure in spawn_elf_map",
579 failure SET_CAPS "Failure in set_special_caps",
580 failure MONEP_SLOT_ALLOC "Failure allocating a slot for monitor EP",
581 failure MONITOR_CLIENT "Failure in monitor_client_setup",
582 failure FREE "Failure in spawn_free",
585 failure CREATE_ROOTCN "Failure creating root CNode",
586 failure CREATE_TASKCN "Failure creating task CNode",
587 failure MINT_TASKCN "Failure minting task CNode into root CNode",
588 failure CREATE_PAGECN "Failure creating page CNode",
589 failure CREATE_VNODE "Failure creating top-level VNode",
590 failure COPY_VNODE "Failure copying top-level VNode from existing domain",
591 failure CREATE_DISPATCHER "Failure creating DCB",
592 failure CREATE_DISPATCHER_FRAME "Failure creating dispatcher frame",
593 failure CREATE_SELFEP "Failure creating endpoint to self",
594 failure CREATE_ARGSPG "Failure creating page for arguments",
595 failure CREATE_FDSPG "Failure creating page for file descriptors",
596 failure MINT_ROOTCN "Failure minting root CNode into task CNode",
597 failure CREATE_SLOTALLOC_CNODE "Failure creating slot_alloc cnode",
598 failure MINT_BASE_PAGE_CN "Failure minting base page CNode into root CNode",
599 failure MINT_SEGCN "Failure minting segment CNode into root CNode",
600 failure MINT_PAGECN "Failure minting page CNode into root CNode",
601 failure MINT_INHERITCN "Failure minting inherit CNode into root CNode",
604 failure MAP_DISPATCHER_TO_NEW "Failure mapping dispatcher frame to new domain",
605 failure MAP_DISPATCHER_TO_SELF "Failure mapping dispatcher frame to parent",
606 failure MAP_ARGSPG_TO_NEW "Failure mapping arguments page to new domain",
607 failure MAP_ARGSPG_TO_SELF "Failure mapping arguments page to parent",
608 failure MAP_FDSPG_TO_NEW "Failure mapping file descriptors page to new domain",
609 failure MAP_FDSPG_TO_SELF "Failure mapping file descriptors page to parent",
611 failure FILL_SMALLCN "Failure filling smallcn of new domain",
612 failure MAP_BOOTINFO "Failure mapping bootinfo to new domain",
613 failure FIND_MODULE "Didn't find module to be spawned",
614 failure MAP_MODULE "Failed mapping in module",
615 failure UNMAP_MODULE "Failed unmapping module",
616 failure CREATE_SEGCN "Failed to create segment CNode",
617 failure CREATE_SMALLCN "Failed to create small RAM caps CNode",
620 failure ARGSPG_OVERFLOW "Overflow in arguments page: too many arguments or environment variables",
621 failure SERIALISE_VSPACE "Error in serialising vspace data",
623 // setup inherited caps
624 failure SETUP_INHERITED_CAPS "Failure setup inherited caps",
626 // setup argument caps
627 failure SETUP_ARGCN "Failure setup CNode containing caps passed as arguments",
628 failure COPY_ARGCN "Error copying CNode containing caps passed as arguments",
630 // setup file descriptors
631 failure SETUP_FDCAP "Failure setting up frame for copying file descriptors",
632 failure FDSPG_OVERFLOW "Overflow in file descriptors page: too many file descriptors",
634 // setup session id cap
635 failure SETUP_SIDCAP "Failure setting up session capability",
637 failure SETUP_KERNEL_CAP "Failure setting up kernel capability",
640 failure DELETE_ROOTCN "Failure deleting root CNode cap in parent",
641 failure FREE_ROOTCN "Failure freeing slot for root CNode cap in parent",
642 failure DELETE_TASKCN "Failure deleting task CNode cap in parent",
643 failure FREE_TASKCN "Failure freeing slot for task CNode cap in parent",
645 failure COPY_PACN "Error copying phys addr CNode cap",
646 failure COPY_MODULECN "Error copying module CNode cap",
647 failure COPY_IRQ_CAP "Error copying IRQ cap",
648 failure COPY_IO_CAP "Error copying IO cap",
649 failure COPY_PERF_MON "Error copying performance monitoring cap",
650 failure COPY_KERNEL_CAP "Error copying Kernel cap",
651 failure COPY_INHERITCN_CAP "Error copying capability from inherited cnode",
652 failure COPY_PROC_MNG_CAP "Error copying ProcessManager cap",
653 failure COPY_DOMAIN_CAP "Error copying domain cap",
654 failure COPY_DEVMAN_CAP "Error copying devman cap",
657 failure DISPATCHER_SETUP "Dispatcher setup",
660 failure DOMAIN_ALLOCATE "No more domain descriptors",
661 failure DOMAIN_NOTFOUND "Domain not found",
662 failure DOMAIN_RUNNING "Domain is running",
664 failure IDENTIFY_PROC_MNGR_CAP "Failed to identify process manager cap",
665 failure NOT_PROC_MNGR "Request did not come from the process manager",
667 failure CREATE_DOMAIN_TABLE "Failed to create domain hash table",
668 failure DOMAIN_CAP_HASH "Failed to compute hash code for domain cap",
669 failure DOMAIN_TABLE_FIND "Failed to find requested domain in domain table",
671 failure FIND_SPAWNDS "Unable to find spawn daemons",
672 failure MALFORMED_SPAWND_RECORD "Spawn record without ID found?",
675 // errors related to the process manager
676 errors proc_mgmt PROC_MGMT_ERR_ {
677 failure NOT_MONITOR "Received monitor-only request from non-monitor domain",
678 failure SPAWND_EXISTS "Requested spawnd slot already exists",
679 failure INVALID_SPAWND "Not connected to spawnd on the requested core",
680 failure CREATE_DOMAIN_CAP "Failed to create new domain cap",
681 failure SPAWND_REQUEST "Failed to send request to spawnd",
682 failure DOMAIN_CAP_HASH "Failed to compute hash code for domain cap",
683 failure CREATE_CLIENTS_TABLE "Failed to create pending clients hash table",
684 failure CLIENTS_TABLE_FIND "Failed to find requested client in pending clients table",
685 failure CREATE_DOMAIN_TABLE "Failed to create domain hash table",
686 failure DOMAIN_TABLE_FIND "Failed to find requested domain in domain table",
687 failure DOMAIN_NOT_RUNNING "Domain is not currently running",
688 failure ALREADY_SPANNED "Domain has already been spanned to the given core",
689 failure KILL "Failed to kill requested domain",
692 // errors from ELF library
693 errors libelf ELF_ERR_ {
694 failure FILESZ "Invalid file size",
695 failure HEADER "Incompatible ELF header",
696 failure PROGHDR "Failed program header sanity checks",
697 failure ALLOCATE "Nested failure in allocator function",
698 failure NOT_PAGE_ALIGNED "Unaligned load address specified in ELF header",
701 // errors from memory management library
702 errors libmm MM_ERR_ {
703 failure FIND_NODE "Failure in find_node()",
704 failure CHUNK_NODE "Failure in chunk_node()",
705 failure SLOT_MM_ALLOC "Nested failure in slot allocator calling mm_alloc",
706 failure SLOT_NOSLOTS "Slot allocator has run out of slots",
707 failure SLOT_ALLOC_INIT "Failure initialising slot allocator",
708 failure MM_INIT "Failure in mm_init()",
709 failure MM_ADD "Failure in mm_add()",
710 failure MM_ADD_MULTI "Failure in mm_add_multi()",
711 failure MM_FREE "Failure in mm_free()",
712 failure NEW_NODE "Failed allocating new node from slot allocator",
713 failure OUT_OF_BOUNDS "Given memory base address / size exceeds bounds of allocator",
714 failure ALREADY_PRESENT "Node already present in add_node()",
715 failure ALREADY_ALLOCATED "Requested node already allocated in find_node()",
716 failure NOT_FOUND "No matching node found",
717 failure MISSING_CAPS "Region exists in allocator, but intermediate caps are missing",
718 failure CHUNK_SLOT_ALLOC "Failure allocating slots for chunking",
719 failure RESIZE_NODE "Nested failure in resize_node()",
720 failure REALLOC_RANGE "Nested failure in realloc_range()",
724 errors init INIT_ERR_ {
725 failure SPAWN_MEM_SERV "Failed to spawn mem_serv",
726 failure INIT_MEM_SERV "Failed to initialise mem_serv",
727 failure SPAWN_MONITOR "Failed to spawn monitor",
728 failure INIT_MONITOR "Failed to init monitor",
729 failure COPY_EP_TO_MEM_SERV "Failed copying EP to mem_serv",
730 failure COPY_EP_TO_MONITOR "Failed copying EP to monitor",
731 failure SETUP_MONITOR_CHAN "Failed setting up channel to monitor",
732 failure SETUP_MEM_SERV_CHAN "Failed setting up channel to mem_serv",
733 failure RUN_MONITOR "Failed to make monitor runnable",
734 failure RUN_MEM_SERV "Failed to make mem_serv runnable",
735 failure FREE_MONITOR "Failed to free spawn caps from monitor",
736 failure FREE_MEM_SERV "Failed to free spawn caps from mem_serv",
737 failure COPY_SUPERCN_CAP "Failed to copy superCN cap to mem_serv",
738 failure MAP_BOOTINFO "Failed to map bootinfo to child",
739 failure COPY_KERNEL_CAP "Failed to copy kernel cap to monitor",
740 failure COPY_BSP_KCB "Error copying BSP KernelControlBlock",
741 failure COPY_IPI "Failed to copy IPI cap to monitor",
742 failure COPY_PROC_MNG_CAP "Failed to copy ProcessManager cap to monitor",
743 failure COPY_PERF_MON "Failed to copy performance monitoring cap to monitor",
744 failure COPY_MODULECN_CAP "Failed to copy module CNode cap to monitor",
745 failure COPY_PACN_CAP "Failed to copy phys addr CNode cap to monitor",
746 failure COPY_IRQ_CAP "Failed to copy IRQ cap to monitor",
747 failure COPY_IO_CAP "Failed to copy IO cap to monitor",
748 failure COPY_UMP_CAP "Failed to copy UMP cap to monitor",
749 failure NO_MATCHING_RAM_CAP "No suitably-sized RAM cap found when initialising local memory allocator",
752 //errors in continuation management
753 errors filter CONT_ERR_ {
754 failure NO_MORE_SLOTS "No free slots available",
760 errors ethersrv ETHERSRV_ERR_ {
761 failure TOO_MANY_BUFFERS "ethersrv failed to allocate a new buffer descriptor in register_buffer",
762 failure TOO_MANY_VNICS "MAX_VNICS reached, can't create more VNICS",
763 failure BUFFER_NOT_FOUND "ethersrv did not find the buff given filter reg",
764 failure NOT_ENOUGH_MEM "not enough internal memory with driver",
765 failure CANT_TRANSMIT "Cant transmit the packet",
766 failure INVALID_STATE "VNIC is in invalid state for current operation",
767 failure FRAME_CAP_MAP "Cant map the frame cap in address space",
771 //errors in port management
772 errors filter PORT_ERR_ {
773 failure NOT_ENOUGH_MEMORY "Not enough memory for internals of port mng",
774 failure NO_MORE_PORT "No free port available",
775 failure IN_USE "Requested port is already in use",
776 failure REDIRECT "Requested port cannot be redirected",
777 failure NOT_FOUND "Could not find requested port to close",
781 //errors in Filter management
782 errors filter NET_FILTER_ERR_ {
783 failure NOT_INITIALIZED "Filter subsystem not yet initalized",
784 failure NOT_FOUND "Filter not found or not installed",
785 failure ALREADY_EXISTS "Filter already installed",
789 //errors in Filter management
790 errors filter FILTER_ERR_ {
791 failure NOT_ENOUGH_MEMORY "Not enough memory to register filters",
792 failure BUFF_NOT_FOUND "Buffer given for filter reg. not found on driver",
793 failure FILTER_BUSY "Filter memory is busy in another operation.Try Again",
794 failure NO_NETD_MEM "Netd memory for filter is not registered",
795 failure FILTER_NOT_FOUND "requested filter for de/re-registration not found",
796 failure BUFFER_NOT_FOUND "requested filter for re-registration not found",
800 // errors generated in the terminal library
801 errors term TERM_ERR_ {
802 failure TERMINAL_IN_USE "Can not associate session with terminal, the terminal is already in use",
803 failure NOT_PART_OF_SESSION "Domain is not part of a session",
804 failure EXPORT_SESSION_INTERFACE "Failed to export terminal session interface",
805 failure REGISTER_SESSION_INTERFACE "Failed to register terminal session interface at nameservice",
806 failure EXPORT_OUT_INTERFACE "Failed to export terminal interface for outgoing characters",
807 failure EXPORT_IN_INTERFACE "Failed to export terminal interface for incoming characters",
808 failure EXPORT_CONF_INTERFACE "Failed to export terminal configuration interface for configuration messages",
809 failure ASSOCIATE_WITH_TERM_REPLY "Failed to send session_associate_with_terminal_reply",
810 failure RECV_CHARS "Received characters at outgoing characters interface",
811 failure SEND_CHARS "Could not send characters to client",
812 failure RECV_CONFIGURATION "Received a configuration message a the client",
813 failure FILTER_NOT_FOUND "Could not find filter specified for removal",
814 failure TRIGGER_NOT_FOUND "Could not find trigger specified for removal",
815 failure LOOKUP_SESSION_RECORD "Error looking up session record at octopus",
816 failure PARSE_SESSION_RECORD "Error parsing session record",
817 failure BIND_IN_INTERFACE "Failed to bind to terminal interface for incoming characters",
818 failure BIND_OUT_INTERFACE "Failed to bind to terminal interface for outgoing characters",
819 failure BIND_CONF_INTERFACE "Failed to bind to terminal configuration interface",
820 failure IO "Terminal I/O error",
821 failure TX_BUSY "Failed to send message, terminal client is busy",
822 failure UNKNOWN_CONFIG_OPT "Unknown configuration option",
823 failure CHANGE_WAITSET "Failed to change the waitset",
826 // errors generated by libangler
827 errors angler ANGLER_ERR_ {
828 failure LOOKUP_TERMINAL "Error looking up iref of terminal session interface at nameservice",
829 failure CREATE_SESSIONID "Error creating ID capability used to represent session",
830 failure BIND_TERMINAL "Error binding to terminal session interface",
831 failure INIT_RPCCLIENT "Error initializing rpc client for terminal session interface",
832 failure ASSOCIATE_WITH_TERMINAL "Error associating session with terminal",
833 failure STORE_SESSION_STATE "Error storing session state at ocotpus",
837 errors trace TRACE_ERR_ {
838 success SUBSYS_DISABLED "Event not recorded because subsystem is disabled",
839 failure NO_BUFFER "Trace buffer does not exist",
840 failure MAP_BUF "Failed to map trace buffer",
841 failure CREATE_CAP "Failed to create trace buffer cap",
842 failure CAP_COPY "Failed to copy trace buffer cap",
843 failure KERNEL_INVOKE "Failed to set up tracing in kernel",
844 failure UNAVAIL "Tracing not available on core",
847 errors driverkit DRIVERKIT_ERR_ {
848 failure NO_CAP_FOUND "No capability to map this address range.",
849 failure NO_DRIVER_FOUND "No driver found that corresponds to this class.",
850 failure DRIVER_DETACH "Unable to destroy driver by detaching it from device.",
851 failure DRIVER_INIT "There was a problem initializing the driver.",
852 failure CONTROL_IFACE_EXPORT "Can't export control interface.",
853 failure CONTROL_SERVICE_INIT "Failed to initialize control service.",
854 failure CAP_CAPACITY "Cap capacity reached, can't send more.",
857 // errors in PCI/device handling
858 errors pci PCI_ERR_ {
859 failure DEVICE_NOT_INIT "Device not initialized",
860 failure IOAPIC_INIT "Failed in ioapic_init()",
861 failure MINT_IOCAP "Failed to mint IO cap",
862 failure ROUTING_IRQ "Failed while routing interrupt",
863 failure IRQTABLE_SET "Failed to set handler on local IRQ table",
864 failure UNKNOWN_GSI "Unknown global system interrupt number",
865 failure INVALID_VECTOR "Invalid interrupt vector",
866 failure DEVICE_INIT "Could not initialize device",
867 failure MEM_ALLOC "Could not allocate memory",
868 failure WRONG_INDEX "Invalid index for requested cap",
869 failure MSIX_NOTSUP "MSI-X is not sypported by the device",
870 failure MSIX_BADVECTOR "Invalid index for MSI-X vector",
871 failure MSIX_DISABLED "MSI-X is not enabled for this device",
872 failure SRIOV_NOT_SUPPORTED "SR-IOV not supported by this device",
873 failure SRIOV_MAX_VF "SR-IOV trying to enable VF number larger than max supported",
874 failure ARG_PARSE "PCI argument parse",
875 failure NO_CAP "No capability given",
879 errors acpi ACPI_ERR_ {
880 failure NO_MCFG_TABLE "No MCFG Table found.",
881 failure INVALID_PATH_NAME "Invalid ACPI path name.",
882 failure INVALID_HANDLE "Invalid ACPI handle.",
883 failure NO_CHILD_BRIDGE "No matching child bridge found.",
884 failure GET_RESOURCES "Failed to execute _CRT method.",
885 failure SET_IRQ "Failed to set IRQ for device.",
886 failure NO_MADT_TABLE "No APIC found in ACPI.",
887 failure OBJECT_NOT_FOUND "Could not locate ACPI object.",
890 errors iommu IOMMU_ERR_ {
891 failure INVALID_CAP "Cap is not a suitable VNode",
892 failure IOMMU_NOT_FOUND "The IOMMU for the devices was not found",
893 failure DOM_NOT_FOUND "Domain for cap was not found",
894 failure DEV_NOT_FOUND "Device does not belong to the domain",
895 failure DEV_USED "The device is currently used by another domain",
896 failure DOM_FULL "No more domains can be created",
897 failure DOM_CREATE "Failure while creating the domain",
898 failure NO_UNITS "Hardware doesn't contain any VT-d hardware units",
899 failure NOT_ENABLED "IOMMU is not enabled",
900 failure INVALID_EP "Endpoint is not valid",
901 failure NOT_SUPPORTED "The requested operation is not supported",
905 errors skb SKB_ERR_ {
906 failure CONVERSION_ERROR "Conversion (parsing) of the result failed.",
907 failure EXECUTION "The SKB returned an error Check error code.",
908 failure EVALUATE "Failure in skb_evalute()",
909 failure RUN "Failure in running rpc: run",
910 failure GOAL_FAILURE "Posted goal could not be satisfied.",
911 failure UNEXPECTED_OUTPUT "Query produced output but none was expected.",
912 failure OVERFLOW "Parameter exceeds internal buffer length.",
913 success IO_OUTPUT "Read I/O Output from SKB.",
916 errors skb_datagatherer SKB_DATAGATHERER_ERR_ {
917 failure CPUID "Failed to collect CPUID information",
920 // errors in a file system implementation
922 failure INVALID_FH "The given file handle is invalid or has expired",
923 failure NOTDIR "The given file handle is not a directory",
924 failure NOTFILE "The given file handle is not a file",
925 failure INDEX_BOUNDS "The given directory index is out of bounds",
926 failure NOTFOUND "The given name does not exist",
927 failure EXISTS "The given name already exists",
928 failure NOTEMPTY "The given directory is not empty",
930 failure BULK_NOT_INIT "The bulk transfer mode has not been initialised",
931 failure BULK_ALREADY_INIT "The bulk_init() call may only be made once per connection",
934 // errors in the vfs library
935 errors vfs VFS_ERR_ {
936 success EOF "End of file",
937 failure BAD_MOUNTPOINT "The mountpoint is invalid",
938 failure MOUNTPOINT_IN_USE "The given mountpoint is already in use",
939 failure BAD_URI "The URI given to mount is invalid",
940 failure UNKNOWN_FILESYSTEM "The filesystem type in the URI is unknown",
941 failure MOUNTPOINT_NOTFOUND "The given mountpoint doesn't exist",
942 failure NOT_SUPPORTED "The file type does not support this operation",
944 failure IN_OPEN "Nested error in vfs_open()",
945 failure IN_STAT "Nested error in vfs_stat()",
946 failure IN_READ "Nested error in vfs_read()",
948 failure BCACHE_LIMIT "Number of buffer cache connections exceeded",
952 // FIXME: someone could copy in the real error strings...
953 errors nfs NFS_ERR_ {
954 /* transport error */
955 failure TRANSPORT "Unknown error in underlying NFS RPC transport.",
958 failure MNT_PERM "Not owner",
959 failure MNT_NOENT "No such file or directory",
960 failure MNT_IO "I/O error",
961 failure MNT_ACCES "Permission denied",
962 failure MNT_NOTDIR "Not a directory",
963 failure MNT_INVAL "Invalid argument",
964 failure MNT_NAMETOOLONG "Filename too long",
965 failure MNT_NOTSUPP "Operation not supported",
966 failure MNT_SERVERFAULT "A failure on the server",
969 failure PERM "NFS error (PERM). See RFC1813.",
970 failure NOENT "NFS error (NOENT). See RFC1813.",
971 failure IO "NFS error (IO). See RFC1813.",
972 failure NXIO "NFS error (NXIO). See RFC1813.",
973 failure ACCES "NFS error (ACCES). See RFC1813.",
974 failure EXIST "NFS error (EXIST). See RFC1813.",
975 failure XDEV "NFS error (XDEV). See RFC1813.",
976 failure NODEV "NFS error (NODEV). See RFC1813.",
977 failure NOTDIR "NFS error (NOTDIR). See RFC1813.",
978 failure ISDIR "NFS error (ISDIR). See RFC1813.",
979 failure INVAL "NFS error (INVAL). See RFC1813.",
980 failure FBIG "NFS error (FBIG). See RFC1813.",
981 failure NOSPC "NFS error (NOSPC). See RFC1813.",
982 failure ROFS "NFS error (ROFS). See RFC1813.",
983 failure MLINK "NFS error (MLINK). See RFC1813.",
984 failure NAMETOOLONG "NFS error (NAMETOOLONG). See RFC1813.",
985 failure NOTEMPTY "NFS error (NOTEMPTY). See RFC1813.",
986 failure DQUOT "NFS error (DQUOT). See RFC1813.",
987 failure STALE "NFS error (STALE). See RFC1813.",
988 failure REMOTE "NFS error (REMOTE). See RFC1813.",
989 failure BADHANDLE "NFS error (BADHANDLE). See RFC1813.",
990 failure NOT_SYNC "NFS error (NOT_SYNC). See RFC1813.",
991 failure BAD_COOKIE "NFS error (BAD_COOKIE). See RFC1813.",
992 failure NOTSUPP "NFS error (NOTSUPP). See RFC1813.",
993 failure TOOSMALL "NFS error (TOOSMALL). See RFC1813.",
994 failure SERVERFAULT "NFS error (SERVERFAULT). See RFC1813.",
995 failure BADTYPE "NFS error (BADTYPE). See RFC1813.",
996 failure JUKEBOX "NFS error (JUKEBOX). See RFC1813.",
1000 errors lwip LWIP_ERR_ {
1001 failure MEM "Out of memory error.",
1002 failure BUF "Buffer error.",
1003 failure TIMEOUT "Timeout.",
1004 failure RTE "Routing problem.",
1005 failure ABRT "Connection aborted.",
1006 failure RST "Connection reset.",
1007 failure CLSD "Connection closed.",
1008 failure CONN "Not connected.",
1009 failure VAL "Illegal value.",
1010 failure ARG "Illegal argument.",
1011 failure USE "Address in use.",
1012 failure IF "Low-level netif error",
1013 failure ISCONN "Already connected.",
1014 failure INPROGRESS "Operation in progress",
1015 failure TXFULL "TX capacity is full, try again later",
1018 // DIST library errors
1019 errors dist DIST_ERR_ {
1020 failure NS_REG "Name service register failed.",
1021 failure NS_LOOKUP "Name service lookup failed.",
1024 // octopus library errors
1025 errors octopus OCT_ERR_ {
1026 failure NO_RECORD "No record exists matching the specified query.",
1027 failure NO_RECORD_NAME "Your query needs to specify a designated record name (no regex/variable allowed).",
1028 failure CONSTRAINT_MISMATCH "The constraints you specified on set do not match the record in the database.",
1029 failure QUERY_SIZE "Query is too big. Try to increase MAX_QUERY_LENGTH.",
1030 failure INVALID_FORMAT "The read format you have specified is not valid.",
1031 failure UNKNOWN_ATTRIBUTE "An attribute in your format was not found in the record.",
1032 failure UNSUPPORTED_BINDING "This binding is unsupported by the underlying implementation.",
1033 failure PARSER_FAIL "Record parser encountered syntax error.",
1034 failure ENGINE_FAIL "Database error during query execution.",
1035 failure NO_SUBSCRIPTION "No subscription found matching the query.",
1036 failure NO_SUBSCRIBERS "No subscription found matching the query.",
1037 failure MAX_SUBSCRIPTIONS "Failed to register subscription. Try to increase MAX_SUBSCRIPTIONS.",
1038 failure INVALID_ID "Invalid Trigger ID.",
1039 failure CAP_NAME_UNKNOWN "Capability storage: Unknown name.",
1040 failure CAP_OVERWRITE "Capability storage: Cap already exists.",
1041 failure IDCAP_INVOKE "Error invoking ID capability.",
1044 // kaluga library errors
1045 errors kaluga KALUGA_ERR_ {
1046 failure PARSE_MODULES "Cannot parse menu.lst.",
1047 failure MODULE_NOT_FOUND "Boot module not found.",
1048 failure DRIVER_ALREADY_STARTED "Driver for this type of device is already running.",
1049 failure DRIVER_NOT_AUTO "Driver not declared as auto in menu.lst.",
1050 failure WAITING_FOR_ACPI "Unable to wait for ACPI",
1051 failure WATCHING_FOR_SPAWNDS "Unable to watch for spawnds",
1052 failure QUERY_LOCAL_APIC "Unable to query local APIC.",
1053 failure UNKNOWN_PLATFORM "Unable to initialize platform",
1054 failure CAP_ACQUIRE "Unable to acquire capabilities for driver",
1057 // errors generated by THC
1059 failure CANCELED "Operation canceled",
1062 // errors generated by memory server
1064 failure SKB "Invalid data from SKB",
1065 failure INIT_PEERS "Could not initialise peer data structures",
1068 // errors generated by startd
1069 errors startd STARTD_ERR_ {
1070 failure BOOTMODULES "Invalid bootmodules file",
1073 errors lox LOX_ERR_ {
1074 failure INIT_LOCKS "Failure initialising locks",
1075 failure NO_LOCKS "No more locks available",
1078 // errors generated by VBE framebuffer driver
1079 errors vbe VBE_ERR_ {
1080 failure MODE_NOT_FOUND "Unknown/unsupported video mode requested",
1081 failure BIOS_CALL_FAILED "Unknown error returned from VBE BIOS call",
1084 // errors generated by lib/blk/ahci
1085 errors ahcid AHCI_ERR_ {
1086 failure PORT_INIT "Port initialization failed",
1087 failure PORT_INVALID "Provided port id is not valid",
1088 failure PORT_BUSY "Port has been opened elsewhere",
1089 failure PORT_MISMATCH "Port is not opened by client",
1090 failure NO_FREE_PRD "No free PRD left for user data",
1091 failure ILLEGAL_ARGUMENT "Illegal argument in call",
1094 errors sata SATA_ERR_ {
1095 failure INVALID_TYPE "Unknown FIS type or invalid/unimplemented field for type",
1098 errors mmchs MMC_ERR_ {
1099 failure TRANSFER "Error during card read/write operation.",
1100 FAILURE READ_READY "Card not ready for reading.",
1101 FAILURE WRITE_READY "Card not ready for writing.",
1104 // errors generated by FAT
1105 errors fat FAT_ERR_ {
1106 failure BAD_FS "Filesystem does not look like FAT, or is an unsupported kind of FAT",
1109 // errors generated by VFS's fs cache library
1110 errors cache FS_CACHE_ {
1111 failure FULL "Cache is full",
1112 failure NOTPRESENT "Requested key is not in cache",
1113 failure CONFLICT "Cache already contains an item with the requested key",
1116 // errors generated by OMAP SDMA driver
1117 errors omap_sdma OMAP_SDMA_ERR_ {
1118 failure NO_AVAIL_CHANNEL "All channels are currently allocated",
1119 failure TRANSACTION "Memory Transaction error occured",
1120 failure SUPERVISOR "Supvervisor transaction error occured",
1121 failure MISALIGNED_ADDRESS "Transfer addresses were misaligned",
1122 failure HARDWARE_LIMIT_SIZE "Transfer size values too large for hardware",
1123 failure HARDWARE_LIMIT_ADDR "Transfer address modifier values too large for hardware",
1124 failure OUT_OF_BOUNDS "Transfer access outside frame cap boundaries",
1125 failure CAP_LOOKUP "Failure during frame capability lookup",
1128 // common/generic errors
1129 errors common ERR_ {
1130 failure INVALID_ARGS "Invalid arguments",
1131 failure NOTIMP "Not implemented",
1134 errors bulk_transfer BULK_TRANSFER_ {
1135 failure MEM "Internal not enough memory error",
1136 failure NO_CALLBACK "No callback was set",
1137 failure CHAN_CREATE "Channel create operation failed.",
1138 failure CHAN_BIND "Channel bind operation failed.",
1139 failure CHAN_ASSIGN_POOL "Channel assign pool operation failed.",
1140 failure CHAN_STATE "Channel has a wrong state",
1141 failure CHAN_TRUST "Channel has a invalid trust level.",
1142 failure CHAN_INVALID_EP "Channel has an invalid endpoint.",
1143 failure CHAN_DIRECTION "The channel has the wrong direction for this operation.",
1144 failure POOL_INVALD "The pool does not match.",
1145 failure POOL_NOT_ASSIGNED "The pool has not yet been assigned to a channel.",
1146 failure POOL_ASSIGN_VETO "The assignment request of the pool has been vetoed.",
1147 failure POOL_MAP "Mapping of the pool failed",
1148 failure POOL_UNMAP "The Unmapping of the pool failed",
1149 failure POOL_ALREADY_ASSIGNED "The pool has already been assigned to this channel.",
1150 failure POOL_ALREADY_REMAPPED "The pool has already been remapped.",
1151 failure BUFFER_NOT_OWNED "The supplied buffer is not owned by this domain.",
1152 failure BUFFER_INVALID "The buffer is not valid.",
1153 failure BUFFER_ALREADY_MAPPED "The buffer is already mapped.",
1154 failure BUFFER_STATE "The buffer has a wrong state.",
1155 failure BUFFER_REFCOUNT "The buffer has a wrong reference count.",
1156 failure BUFFER_NOT_A_COPY "The released buffer is not a copy.",
1157 failure BUFFER_MAP "The mapping of the buffer failed",
1158 failure BUFFER_UNMAP "The unmapping of the buffer failed.",
1159 failure ALLOC_BUFFER_SIZE "The supplied buffer size is not valid.",
1160 failure ALLOC_BUFFER_COUNT "The supplied buffer count is not valid.",
1161 failure INVALID_ARGUMENT "The supplied argument is invalid.",
1162 failure SM_NO_PENDING_MSG "No pending message associated with that tid",
1163 failure SM_EXCLUSIVE_WS "BULK_SM: Exclusive waitset required per channel.",
1164 failure NET_MAX_QUEUES "The number of maximum queues is reached",
1165 failure NET_POOL_USED "The pool is already used over a no-copy channel.",
1170 errors virtio VIRTIO_ERR_ {
1171 failure SIZE_INVALID "Size of the ringe is zero or not a power of two",
1172 failure MAX_INDIRECT "Too much indirect descriptors",
1173 failure CAP_SIZE "Supplied cap is too small",
1174 failure QUEUE_FULL "The queue was full",
1175 failure QUEUE_EMPTY "The queue was empty",
1176 failure BACKEND "Invalid backend",
1177 failure DEVICE_REGISTER "The device registers have not been mapped",
1178 failure NOT_VIRTIO_DEVICE "The device is not a VirtIO device",
1179 failure VERSION_MISMATCH "The VirtIO versions do mismatch",
1180 failure DEVICE_STATUS "VirtIO device has the wrong status",
1181 failure DEVICE_TYPE "The VirtIO device is not of the expected type",
1182 failure DEVICE_IDLE "The VirtIO device is idle. No new requests.",
1183 failure QUEUE_ACTIVE "The selected qeueue is already activated",
1184 failure QUEUE_INVALID "The selected queue does not exist",
1185 failure QUEUE_BUSY "The queue is busy.",
1186 failure BUFFER_SIZE "The buffer size is invalid.",
1187 failure BUFFER_STATE "The state of the buffer / buffer list is invalid",
1188 failure ARG_INVALID "The given argument is invalid.",
1189 failure NO_BUFFER "No buffer given, number of buffers is 0",
1190 failure ALLOC_FULL "The allocator is already full",
1191 failure BUFFER_USED "The buffer is already enqueued and used",
1192 failure NO_DESC_AVAIL "There is no descriptor availabe",
1193 failure DEQ_CHAIN "Not the entire chain could be dequeued",
1194 failure INVALID_RING_INDEX "The supplied index is not valid",
1195 failure BLK_REQ_IOERR "The request ended in an IO error",
1196 failure BLK_REQ_UNSUP "The request type was not supported",
1199 errors xeon_phi XEON_PHI_ERR_ {
1200 failure MGR_REGISTER_FAILED "Registration with the Xeon Phi Manager failed",
1201 failure MGR_MAX_CARDS "There are too much drivers connected",
1202 failure MSG_NOT_REACHABLE "There is not connection to that Xeon Phi",
1203 failure MSG_NOT_INITIALIZED "Messaging service has not been initialized",
1204 failure CLIENT_OPEN_REJECT "Client rejected the channel open",
1205 failure CLIENT_DOMAIN_VOID "The targeted domain was not found",
1206 failure CLIENT_REGISTER "Xeon Phi client could not be registered with the driver",
1207 failure CLIENT_BUSY "The connection to the Xeon Phi driver is busy",
1208 failure INVALID_ID "Supplied Xeon Phi ID is invalid",
1211 errors dma DMA_ERR_ {
1212 failure PCI_ADDRESS "The PCI address of the device is not as expected",
1213 failure DEVICE_UNSUPPORTED "Device ID not supported / wrong configuration",
1214 failure DEVICE_IDLE "The device is idle, no transfers finished",
1215 failure ARG_INVALID "Supplied argument was not valid",
1216 failure RESET_TIMEOUT "The reset attempt timed out",
1217 failure NO_DESCRIPTORS "There are too less descriptors available",
1218 failure NO_REQUESTS "There are no request descriptors left",
1219 failure CHAN_ERROR "Hardware channel error",
1220 failure CHAN_BUSY "The channel is busy and cannot accept more",
1221 failure CHAN_IDLE "There were no finished requests on the channel",
1222 failure REQUEST_UNFINISHED "The request is still in operation",
1223 failure REQUEST_UNSUPPORTED "Request is not supported by this device/channel",
1224 failure REQUEST_TOO_LARGE "Request size is too large",
1225 failure REQUEST_ID "Request with that ID does not exist",
1226 failure ALIGNMENT "The address / size is worngly alined",
1227 failure MEM_OVERLAP "The memory regions overlap",
1228 failure MEM_NOT_REGISTERED "The memory region was not registered",
1229 failure MEM_OUT_OF_RANGE "Memory region is out of supported range",
1230 failure SVC_REJECT "Service request was rejected",
1231 failure SVC_RESOURCES "No resources to handle the service",
1232 failure SVC_VOID "There is no service that could serve the request",
1233 failure SVC_NO_CONNECTION "There is no connection established",
1234 failure SVC_BUSY "Connecton is busy with an RPC",
1237 errors xomp XOMP_ERR_ {
1238 failure INVALID_WORKER_ARGS "The command line arguments are not XOMP worker",
1239 failure BAD_INVOCATION "Domain was not spawned with worker args",
1240 failure INVALID_MSG_FRAME "The supplied messaging frame was invalid",
1241 failure SPAWN_WORKER_FAILED "Spawning of the worker failed",
1242 failure MASTER_NOT_INIT "XOMP Master library has not been initialized",
1243 failure WORKER_INIT_FAILED "Worker initialization failed",
1244 failure WORKER_STATE "worker is in the wrong state",
1245 failure INVALID_MEMORY "the memory has not been registred / shared",
1246 failure INVALID_TOKEN "the token was invalid",
1247 failure INVALID_ARGUMENTS "the library was initialized with invalid args",
1250 errors numa NUMA_ERR_ {
1251 failure NOT_AVAILABLE "NUMA functionality is not available",
1252 failure BITMAP_PARSE "Parsing of the bitmap character string failed",
1253 failure BITMAP_RANGE "The bitmap is too small to hold the data",
1254 failure NUMA_MEMBIND "Setting the memory binding failed",
1255 failure LIB_INIT "Library initialization failure",
1256 failure SKB "Failed to query or connect the SKB",
1257 failure SKB_DATA "The returned data from the SKB is incomplete",
1258 failure NODEID_INVALID "Invalid node ID",
1259 failure COREID_INVALID "Invalid core ID",
1262 errors cpuid CPUID_ERR_ {
1263 failure UNSUPPORTED_FUNCTION "This function is not valid on this CPU.",
1264 failure UNKNOWN_VENDOR "The CPU vendor is not supported",
1265 failure INVALID_INDEX "There is no leaf with this index",
1268 errors cpuid DEVQ_ERR_ {
1269 failure INIT_QUEUE "Could not initalize queue",
1270 failure BUFFER_ID "Could not get a buffer id.",
1271 failure BUFFER_NOT_IN_REGION "The buffer id is not in this region",
1272 failure BUFFER_ALREADY_IN_USE "The buffer is already in use",
1273 failure BUFFER_NOT_IN_USE "The buffer not in use",
1274 failure INVALID_BUFFER_ARGS "Invalid arguments for specified buffer.",
1275 failure INVALID_REGION_ID "The region id is not valid",
1276 failure REGION_DESTROY "The region has still buffers that are in use",
1277 failure INVALID_REGION_ARGS "Invalid arguments for region",
1278 failure REGISTER_REGION "Unable to register region with queue",
1279 failure QUEUE_EMPTY "Nothing to dequeue.",
1280 failure QUEUE_FULL "The queue is full.",
1281 failure DESCQ_INIT "Failure in descriptor queue init",
1284 errors cpuid NET_QUEUE_ERR_ {
1285 failure WRONG_PORT "Received packet with wrong src/dst port",
1286 failure WRONG_IP "Received packet with wrong src/dst IP",
1287 failure CHECKSUM "Header checksum failed",
1288 failure NOT_UDP "Received packet is not UDP",
1289 failure UNKNOWN_BUF_TYPE "Neither RX or TX buffer",
1292 // errors generated by network cards
1293 errors sfn NIC_ERR_{
1294 failure IO "Error during card IO",
1295 failure INTR "Interrupted system call",
1296 failure NOSYS "Not implemented",
1297 failure UNKNOWN "Uknown error",
1298 failure TX_PKT "Error sending packet",
1299 failure RX_PKT "Error receiving packet",
1300 failure RX_DISCARD "Error, packet needs to be discared",
1301 failure ALLOC_BUF "Error allocating buffer",
1302 failure REGISTER_REGION "Error registering a region",
1303 failure DEREGISTER_REGION "Error deregistering a region",
1304 failure ALLOC_QUEUE "Failure allocating queue",
1305 failure ENQUEUE "Failure during enqueue",
1306 failure QDRIVER "Failure starting queue driver",
1309 errors queue QSERVICE_ERR_{
1310 failure NAME "Name too long",
1311 failure ALREADY_ADDED "EP factory already added",
1312 failure NOT_FOUND "Could not request EP with given name",
1313 failure NO_VALID_EP "No valid EP could not initalized client",
1314 failure INVALID_CLIENT "Invalid client struct",
1315 failure INVALID_SERVICE "Invalid service struct",
1318 errors psci PSCI_ERR_{
1319 failure NOT_SUPPORTED "Function not supported",
1320 failure INVALID_PARAMETER "Invalid parameters supplied",
1321 failure DENIED "Access to the function denied",
1322 failure ALREADY_ON "Core is already on",
1323 failure ON_PENDING "There is a pending CPU_ON for this core",
1324 failure INTERNAL_FAILURE "Internal failure",
1325 failure NOT_PRESENT "Resource not present",
1326 failure DISABLED "Core is disabled",
1327 failure INVALID_ADDRESS "Invald address provided",
1328 failure UNKNOWN_ERROR "Error number unknown",
1331 errors arrakis ARRA_ERR_ {
1332 failure GUEST_NOT_FOUND "Guest with given handle not found",
1335 errors vas VAS_ERR_ {
1336 failure CREATE_NAME_CONFLICT "Name already in use",
1337 failure NO_PERMISSION "Insufficient permissions to perform requested action",
1338 failure NOT_FOUND "Cannot find requested address space.",
1339 failure DETACH_SWITCH "Must switch out before detaching",
1340 failure ATTACH_STATE "Cannot attach. Not in detached state",
1341 failure SWITCH_NOT_ATTACHED "Can't switch to unattached file",
1342 failure NOT_SUPPORTED "Currently unsupported functionality",
1343 failure OUT_OF_HANDLES "Not enough handles",
projects / barrelfish / blob